L_PAGE_HLAVNI_NAVIGACE


Control module

GA-TL01 – External control addressing module

Addressing switchboard for connection of up to 4 external controllers to 1 controlling pipeline of GR-U01 unit. Connected controller types can be combined freely (buttons/switches). Any potential-less contact switch can be used as a controller. GA-TL01 modules can be lined up on the line up to 4 in  number or combine with GA-TL04 module. The necessary condition is using unique address modules – no two ID numbers are allowed.

GA-TL04 – module for connection of 4 controllers.
GA-TL01 – fixed 1-2-3-4 addressing module to connect 1 controller.

 

Specification:

Power supply voltage: 22V from controlling pipeline
Work temperature: -10°C to + 50°C
Installation: into KU-68 box

1x potential-less controller – button/switch for GA-TL01
4x potential-less controller – button/switch GA-TL04
Connection to controlling pipeline using screw-free switchboard

GA-IR04 - Infrared remote controller receiver

Receiver module for infrared signal of remote controller intended to be built in any available casing. It is possible to connect up to 4 external controllers – buttons and thus to combine the function of remote control and classic switches in one frame. The module allows simple programming of reaction to received RC signal and is connected onto the controlling pipeline of GR-U01.

 

 

Specification:

Power supply voltage: 22V/30mA from controlling pipeline
IR protocol: NEC
Received frequency: 38 kHz
Work temperature: -10°C to + 50°C
Installation: n KU-68 box
Casing: ABB Tango, Time, Element, Alpha Nea or other according to specification

Up to 15 codes programmed
1-4x potential-less controller – button
Possible to be built-in in any casing
Connection to controlling pipeline using screw-free switchboard

GS-SMD1 - Analog room thermoregulator / temperature scanner

GS-AMD1 is nearly the same as GS-AMD1. The driver is equipped with electronics that is located on the PCB inside the enclosure. The actual sensor is located in a metal housing on the front cover of the driver. The device allows you to select using the host system or energy saving mode (green LED indicator). For easy installation follow-line terminals are all doubled.

 

Specification:

Power supply: 12 ÷ 30V DC
Current: 20 mA without loaded OUT
Resolution: 0.1 ° C (-9.9 ÷ 40 ° C), 1 ° C (-30 ÷ -10 ° C)
Accuracy: ± 0.5 ° C
Operating temperature: -30 ° C to +40 ° C
Protection: IP40
Mounting: Surface

Modbus RTU over RS485 line.
It is connected to the secondary bus Modbus.

GS-AMD1 - Digital room thermoregulator / temperature scanner

Thermometer intended for measuring or, if needed, for correction of room temperature the device allows for measuring, displaying or adjusting temperature using buttons ▲ and ▼. The controller is equipped with 3-digit display. Measured temperature and adjustment thereof are processed by processor, which communicates with superior master system. It is connected to auxiliary bus of GR-U01 unit. The controllers will due to its variable functioning find their use mostly in controlled room heating applications (Individual Room Control). Their low energy consumption and high measuring accuracy makes these units ideal for systems with several measuring locations.

Specification:

Power supply voltage: 12 ÷ 30V DC
Power outtake: 20mA without OUT strain
Resolution: 0,1°C ( -9,9 ÷ 40°C ) , 1°C ( -30 ÷ -10°C )
Measuring accuracy: ± 0,5°C
Work temperature: -30°C÷ + 40°C
Casing: ABB Tango, Time, Element, Alpha Nea, Unica, Niko
Installation: onto KU-68

Various casing types<
MODBUS RTU communication using RS485 line
Connected to auxiliary ModBus bus.
Easy installation into standard installation box
Possibly installed into multiframe setting

GS-NOA70 - Touchscreen room thermoregulator / temperature scanner

GS -NOA70 is a wall mounted controller of brand new type – the main element thereof is graphical display 58x38 mm in size with touchscreen, providing comfortable control of the device with just one finger. The controller measures room temperature and according to selected variant, it can adjust regulation mode, adjustment of the required temperature or speed of Fan-Coil unit fan, or issue an order for switching on of any device. The controller is connected to GR-U01 unit auxiliary bus.

Specification:

Power supply voltage: 12 ÷ 30V DC
Power outtake: max. 40mA
Measuring range: -10°C ÷ + 50°C
Measuring accuracy: ± 0,5°C
Work temperature: -10°C  ÷ + 50°C
Casing: IP20
Installation: onto KU-68

Various casing types
MODBUS RTU communication using RS485 line
Connected to auxiliary ModBus bus
Easy installation into standard installation box

GILD system features

  • The complex system
  • Independent of actual control items design
  • Usable in both newly built and reconstructed buildings
  • Easy installation and configuration
  • All housing functions under central management
  • High rate of return due to energy savings
  • Original Czech product

Pressentation of GILD system

↑ up